How to Work for Industrial Vibrating Screen?

The vibrating screen is widely used in petroleum, coal, chemical, metallurgical and other industries as an inevitable equipment of ore separating line, and its screening trajectory is divided into circular vibrating screen, elliptical vibrating screen, linear vibrating screen, balanced elliptical vibrating screen, changeable elliptical vibrating screen, special trajectory. According to the operating frequency of the excitation axis, the vibratory screen can be divided into single-frequency vibrating screen and multiplex frequency vibrating screen.

According to the structure and working principle of the screening machinery, it can be roughly divided into the following categories:

(1) Fixed Screen Working part is fixed, the material screening relys on the sliding movement along the working face. Fixed grid screen is a kind of screen that applicated more in the concentrator. Which is used for the coarse crushing or medium crushing in the pre-screening. It is simple in structure, convenient manufacture, does not consume power,we can directly unload the ore to the screening surface. The main disadvantage are the followings : the productivity is low, the screening efficiency is low , which is generally only 50-60%.

(2) Roller Screen The working face is constituted by the horizontally arranged rolling shaft, there are plates on the rolling shaft ,the fine materials are obtained through the gap between rollers or plates. the bulk materials are driven by the roller to one end and finally discharged from the other end. The concentrator rarely use this sieve. To a service-oriented brand integrity, as the professional manufacturer of complete sets of mining machinery, like rock crushing plant, Henan Hongxing is always doing the best in products and service.rod grinding machine: http://www.hxjqchina.com/n119.html

(3) the cylindrical sieve The working portion is the cylindrical shape. the entire sieve rotate around the axis of the cylinder, in the general case, the inclination cylinder axis is usually not very large . Fed into the material from one end of the cylinder, the finer level materials adopted by the screening hole of the cylindrical working surface , coarse-grained materials are discharged from the other end of the cylinder. The rotational speed of the cylindrical screen is very low, works smooth, power balance is good. But the sieve is easy to plug, screening efficiency is low, and the work area is small, productivity is low. The concentrator rarely use it to make the screening equipment.

(4) plane motion sieve The body wobbles or vibrates in-plane . According to their their plane motion trajectory, it is divided into linear motion, circular motion, elliptical motion and complex motion. Shaking screen and vibrating sieve (different from the vibrating grizzly feeder)fall into this category. Shaking screen crank linkage as transmission parts. Motor drives the eccentric shaft rotation via a belt and pulley , so the body do the reciprocating movement along a certain direction through the connecting rod . The movement direction Perpendicular to the strut or suspended rod line ,duo to the the oscillating motion , the materials on the screening face move towards the discharge mouth at a certain speed, at the same time, the materials get screening.

Leave a Reply

You must be logged in to post a comment.